[doc] Polished Delorean
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Polished Delorean
- From: "Paul" <willinot@xxxxxxxxxxxxxx>
- Date: Mon, 27 Mar 2006 11:17:56 -0000
Hi All,
Just thought I would mention that I used a polish (top coat sealer)
the other weekend on the Delorean after the usual S/S Cleaner etc
and it gives a really good finish. I have posted a few photos under
the heading "polished delorean" to show the results. The nice thing
about it is the way the water beads off like normally polished
cars. It held up fairly well too as the water was still beading the
following weekend when I gave her another coat.
Ive also shown a few photos of the polished result before it rains
and the car cover Im using too to prove that as a habit I dont keep
her out in the rain.
Paul
#2493
ps: I managed to sort the rear lights out (temp fix.) By installing
the PCB back into the housing but fitting it over as opposed to
under the middle catches it bends the board slightly and ever since
all the lights are working 100%. Just in case anyone else has a
similar problem it may come in handy as a temp fix. The problem for
those who dont remember was: when I braked the side light came on
which was ok during the day but at night meant I had only one brake
light.
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/doc-uk/
<*> To unsubscribe from this group, send an email to:
doc-uk-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN