RE: [doc] Help me with my new Delorean
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [doc] Help me with my new Delorean
- From: "Chris Parnham" <cp@xxxx>
- Date: Wed, 29 Jan 2003 18:56:37 -0000
Its NOT the one near the water pump...other END of the ENGINE you cannot
see it until you've removed the air intake manifold. You're looking at the
wrong thing.
Chrispy.
-----Original Message-----
From: kevin_sar <k@xxxx> [mailto:k@xxxx]
Sent: 29 January 2003 17:02
To: doc-uk@xxxxxxxxxxxxxxx
Subject: Re: [doc] Help me with my new Delorean
Hi Chris
You have confused me now, with :
> Are you sure you are looking at the right sender? Its not the one
on the
> Water pump, but under the air intake on the other end of the engine.
When standing at the the back of the D looking into the engine bay
directly in front of you near the water pump, is a sensor that
screws, it looks like into the water pump housing. It has two very
small spade terminals which connects to the lead. I assumed this was
the temp gauge.
Threre is also another temp sensor which is located on the water
pipe, down low on the left hand side this controls the radiator
fans.
If the one that I think is the water temp gauge, not the water temp
gauge do you know where it is. Could you also describe where the temp
sender uner the air filter is.
Thanks
Kevin
DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN