Re: [DML] Euro front plate holder

["Chris Parnham" <chrisparnham@xxxx>]

Luke,

In the UK there is no specific holder, as our licence plates are longer than
yours, most people just drill 2 holes right through the bumper ( facia ),
but I did not want to do that with my previously un-registered, "Dusty", so
I used very strong "Velcro" ( as people at the giants causeway photo-shoot
will know).

You could just use strong double-sided tape, but this sometimes , slips, or
is very difficult to remove later.

Go with Velcro, I used Black for the bit on the car, and white on the back
of the plate.

It has the advantage that you can keep adding a bit more if you feel the
adhesion is not good enough.

Works for me.

Chris P DOC UK



----- Original Message -----
From: "L Sandel" <ls@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Wednesday, June 13, 2001 7:04 PM
Subject: [DML] Euro front plate holder


> Hello list,
>
> Does anybody know of a source for a front license plate holder for Euro
> plates? All I can seem to find are holders for USA plates...
Specifically,
> I'm looking for a way to mount a Euro plate without drilling holes in my
> fascia.
>
> Thanks for any help,
> Luke
>
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>