Re: [DML] Clutch slave.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Clutch slave.





All I can say is it can be done. 

Ian Yanagisawa

On Sep 21, 2013, at 10:25 PM, Stephen Jaeger <jaegerstephen@xxxxxxxxx> wrote:

 

Anyone have some tricks for installing the clutch slave cylinder. I am finding it  impossible to get it in. With the lack of room behind the engine, leaning over the engine while balancing on one elbow and trying to get the pin on the fork into the cylinder and the cylinder into place with one hand is proving quite a challenge. And it is not as easy as the reverse of the removal. I'm thinking I will have to remove the fuel mixture control module to gain more room. Any suggestions would be appreciated.

Steve



__._,_.___


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated