Re: [DML] Re: Fuse box replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Fuse box replacement



A little late now ... keep a wet sponge or wet rag to clean the hot tip. 
Keep the tip shiny. Now that you've read this, get in the car, drive it 
to 88mph and the rest is history.


soma576 wrote , ----On 9/1/2012 8:06 PM ---------------------------:
>
> Finished my fuse box replacement tonight. I switched to my 30W pencil 
> soldering iron and I found that it works VERY well once I made sure to 
> use a razor blade to quickly scrape the tip a few times before each 
> use, followed by tinning the tip, tapping it clean, then putting it 
> right on the connector. I had some great looking solders in seconds. I 
> likened the technique to making sure the connector appeared to be 
> spray-painted with a light coat of solder.
>
> I also had a small metal cookie sheet on the rear shelf. I used a 
> pocket-sized vise grips to hold the wire to the cookie sheet edge with 
> the connector sticking straight over the flat part of the sheet. This 
> way the connector stayed steady while I held the iron and solder wire 
> with my hands. I'm very confident with my soldering ability now :-)
>
> Also - I used some really neat black cold fusing electrical tape to 
> re-wrap my main loom in the electrical compartment. Now I have a very 
> tidy looking fuse area!
>
> Oh and this whole job took about 10 hours!!! Beer to celebrate!
>
> Andy
>
> 




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated