Re: [DML] How to restore a DeLorean
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] How to restore a DeLorean

I attacked mine with a wire wheel, then primed and painted them with 10 coats of Rustoleum brushed enamel:

Bill Robertson

--- In dmcnews@xxxxxxxxxxxxxxx, "Tom Niemczewski" <dmctom@...> wrote:
> Hello all,
> If anyone is interested here's a picture of my front wheel hub before 
> restoration as taken off the car.
> Here's the same hub after.
> After removing the hub from the car it was separated from the brake rotor, 
> sand blasted, bearing removed, zinc plated and reassembled. An old FAG 
> bearing was replaced with a new SKF bearing. Now the hub will be painted 
> with high temperature solvent resistant paint to protected from the harsh 
> environment of salt covered roads of a northern country.
> And the restoration of 6149 continues...
> Greetings from Poland!
> Tom Niemczewski
> Vin 6149 plus 2418, 3633, 5030, 16473, 17086
> Google earth: 52°25'17.66"N, 21° 1'58.40"E


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive