RE: [DML] My fan made it all the way Through the day, but my fan belt didn't

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Welmoed and group,

My all brass & copper radiator ( no aluminum or Plastic ) has a bleeder
screw on upper right hand side.

John Hervey

  

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Welmoed
Sent: Friday, July 06, 2012 12:20 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] My fan made it all the way Through the day, but my fan
belt didn't

Air usually goes to the highest point in the system.
So jacking up the rear before firing up the engine will also help getting
the air out of the radiator and into the rear of the system.


--- In dmcnews@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@...> wrote:
>
> I'd still suggest bleeding at the top of the radiator too, but you will
have to decide on taking the risk of even looking at that plastic radiator
the wrong way, because it may easily crack.
> 
> 
> 
> --- On Fri, 7/6/12, Doug Menkhaus <dmenkhaus@...> wrote:
>  I think the pressurized coolant tester /
> water pump bleed is the way I want to go with it.  If I do it that way I
> don't have to mess with the radiator/heater hose right?
> 
> 
> 
> [Non-text portions of this message have been removed]
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2195 / Virus Database: 2437/5114 - Release Date: 07/06/12



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/