Re: [DML] My fan made it all the way Through the day, but my fan belt di
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] My fan made it all the way Through the day, but my fan belt didn't

While replacing the original fans I also made new - short - ground wires (13 AWG) directly from the connector to the left and right radiator support bolts.

I have planned to do the same with the grounds of the head lamp units.


--- In dmcnews@xxxxxxxxxxxxxxx, "content22207" <brobertson@...> wrote:
> A Bosch fuel pump alone pulls somewhere between 8 and 10 amps -- not a bad idea at all to ungang its ground.
> Bill Robertson
> #5939
> --- In dmcnews@xxxxxxxxxxxxxxx, "Welmoed" <welmoedj@> wrote:
> >
> > Dave's solution consists of a replacement wire 10 AWG between inertia switch ground and one of the gear selector frame bolts.
> > I have completely removed the old ground, leaving it to the other devices to share the original ground.
> > Works for me.
> > 
> > Welmoed.
> >


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive