Re: [DML] Spec .02 Steering -- Success
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Spec .02 Steering -- Success

Houston Part #100840SS advertises stainless U joints (don't know for certain if they are Borgeson, but they do look extremely similar: )

Toby's lower column definitely uses stainless Borgeson U joints.

Spec .02 is functionally/actually identical (DD shaft for the prototype) to those options, with the addition of a vibration reducing U joint -- stainless of course.

Given the amount of money owners spend on stainless DMC loco doodads, a 16% premium -- $30.12 -- for stainless U joints seems reasonable to me. 

Bill Robertson

--- In dmcnews@xxxxxxxxxxxxxxx, "daveswingle2" <swingle_dmc@...> wrote:
> Yes, and the active parts (i.e. the bearings and cross) are most likely not stainless in any case. It's just prettier. 


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive