Re: [DML] fuel sending units
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] fuel sending units

Heating up the stud sounds like it might work but you risk melting a
hole in the tank.

I would fix this with a new stud and a $10 fiberglass kit from
Walmart.  Basically remove the tank (optional), clean it out really
good, cut a hole in a sheet of fiberglass and secure the stud inside
the tank with fiberglass and resin.  Let it dry and continue to secure
it down with several layers of fiberglass and resin.

I patched some holes in my Geo Metro gas tank about a month ago and
its been doing fine.  As long as acetone doesn't get put in the thank
there shouldnt be any issue.

$2 for a stud and $10 for a fiberglass kit is a whole lot cheaper than
a new tank.

-Steve Rice

On Thu, May 10, 2012 at 10:02 AM, Jake Kamphoefner <jakekamp@xxxxxxx> wrote:
> Drain the tank, clean it (no fumes), heat up the stud, press it back into the
> tank.
> -Seems pretty good to me.  It's easy enough for an owner to do, but with an
> hourly labor rate attached, it's probably cheaper for the owner to just have the
> tank replaced when it's at a DMC shop.
> Jake Kamphoefner
> 1063


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive