[DML] Re: Brrne's LCA Ball Joint and Retaining Plates
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Brrne's LCA Ball Joint and Retaining Plates



Byrne, please send me a link to your website. Mrlduet@xxxxxxxxxx  Thanks Louis Duet
--- In dmcnews@xxxxxxxxxxxxxxx, byrne heninger <heningerandassoc@...> wrote:
>
> Hello Group,
>             Attached photo shows we use a jam nut to secure the stem of the ball 
> joint to prevent rotation of stem while tightening the Nyloc nut. Also note, we 
> now use a 1/8" thick fender washer to further secure the urethane bushing.  A 
> total of 3650 PSI is applied in inserting the urethane bushing into the steel 
> bushing at time of assembly.  Thanks for the constructive comments offered on 
> this forum.   Byrne
> 
> [Non-text portions of this message have been removed]
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated