Re: [DML] Re: Overheating, idle speed and stalling issues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Overheating, idle speed and stalling issues



The Marriott residence inn in mt olive was $80. That is where Dave and I are staying. 

Sent from my iPhone

On Apr 16, 2012, at 7:25 PM, "jedimasterglenn" <jedimasterglenn@xxxxxxxxxxx> wrote:

> 
> Hi David,
> 
> I assume by the oil fill plastic screen you mean part 102420 or #10 on this page: http://store.delorean.com/c-333-1-4-0-air-inlet-systemair-cleaner-assembly.aspx
> 
> Mine is intact and not melted.
> 
> I don't seem to be losing coolant unless it's so miniscule I can't tell. The level looks to be holding right where I fill. Oil level has not changed. I'm sure of that because I just changed it and the level is right where I left it, maybe a little lower if anything. 
> 
> Thanks,
> Glenn
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "jtrealtywebspannet" <jtrealty@...> wrote:
> >
> > If this didn't happen before you worked on your cooling system, the chances it is a head gasket are small. Unless you didn't realize it with all of the other cooling leaks. Check in the oil fill and see if the plastic screen is still there and if it is melted. If it is there and NOT melted that means it is even less a chance of a head gasket as the source of the problem. I hesitate to suggest Magic in a Bottle to "fix" a leaking head gasket. I HAVE used Barr's Stop Leak but only to temporarily stop coolant leaks such as a leaky radiator. Much harder to stop a leaky head gasket, much higher pressures, WAY more than 15 psi. Doing a test for combustion gases is non-invasive and not expensive so it can be worth going for it. Before doing that you can pressurize the cooling system and check for leaks. Pull the spark plugs and see if you get any coolant into the cylinders. If you pressurize and lose coolant, it is going SOMEWHERE! Check the oil level in the crankcase too. If it goes up you have a leaky liner seal.
> > David Teitelbaum
> > 
> 
> 


[Non-text portions of this message have been removed]



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated