[DML] Re: Additional Photos of Bryan Pearce's HEIM Trailing Arm Joints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Additional Photos of Bryan Pearce's HEIM Trailing Arm Joints

In some applications where you need to maximize the amount of movement allowed by the Heim joint you use a beveled spacer on both sides of the "ball" where the bolt goes through.
David Teitelbaum

--- In dmcnews@xxxxxxxxxxxxxxx, "Jon Heese" <jonheese@...> wrote:
> Aha, I think my misunderstanding is rooted in the fact that I see nothing that looks anything like a ball-bearing in the picture, save for the heim joint itself.
> So, to alleviate any further confusion (let's hope!), I've labeled the picture with my understanding of what I see (which may be incorrect-- feel free to correct me, anyone):


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive