[DML] Re: Modified Trailing Arms For 1/2" Bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Modified Trailing Arms For 1/2" Bolts

Why did Lotus only use a bolt stuck through a piece of rubber? Because Lotus did not give DMC its best.

Bill Robertson

--- In dmcnews@xxxxxxxxxxxxxxx, Farrar Hudkins <fhudkins@...> wrote:
> Bill,
> Yes, and from what I have read of MIL-spec ball joints, items are available
> today which would more than adequately perform the necessary task. My
> question is if anyone knew why the original designers decided *against*
> such a setup. I don't have a lot of the literature that folks like you and
> David T have to go looking for answers in the past, so I was hoping someone
> knew and could answer it here.
> Thanks for the picture. I will save that for reference. :-)
> Farrar Hudkins
> #2613
> On Wed, Feb 8, 2012 at 10:03 AM, content22207 <brobertson@...>wrote:
> > **
> >
> >
> > Bryan used them:
> > http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/428768_329106420467948_100001057778755_992429_1497988409_n.jpg
> >
> > Bill Robertson
> > #5939
> >
> >
> [Non-text portions of this message have been removed]


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive