[DML] Re: Front body bolts not lining back up

["Matthew" <drivestainless@xxxxxxxxx>]

This is the only thing holding me up from racing you, Bill.  I've driven the car 40 miles now (~140 total over 8 years of ownership).

--- In dmcnews@xxxxxxxxxxxxxxx, "content22207" <brobertson@...> wrote:
>
> Are you sure your body isn't shaped like a banana (ends drooping). What would happen if you picked one end, started as many bolts as you can, then put a jack under the other end and gently raised it up. As Dave Swingle once observed, these are incredibly bendy little cars (he had a back window that simply refused to seat all the way around until he noticed the lift hadn't gone all the way to the floor, banana shaping the body).
> 
> Bill Robertson
> #5939
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "Matthew" <drivestainless@> wrote:
> >
> > Group,
> > 
> > Over the last few years I've been working on a frame-off restoration.  In installing and tightening the body bolts, I've gotten the seat-belt spacers and bolts installed, however, with those in place, the front shock tower bolts are about 1/8" out of alignment, and so I can't get the bolts started.  The body needs to move forward.
> > 
> > All of the other bolts are loose or uninstalled, so it seems like the area between the seat belt bolts and front shock tower bolts has compressed over time (3 years) in the air.   
> > 
> > I have not yet, but I will remove everything from the front end if I have to.  I am desperate, and the vendors I've talked to seem to have very limited experience with this scenario.  
> > 
> > Does anyone have a recommendation as to where the shop could attach a come-a-long to the front end and pull with a relative margin of safety?  One idea was where the hood struts attach. 
> > 
> > The car was never in an accident, and yes, the bolts lined up just fine when it was taken apart.
> > 
> > Thanks for any and all help,
> > 
> > Matt
> >
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/