RE: [DML] Flipping Headlight Buckets Upside Down
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Flipping Headlight Buckets Upside Down

Wouldn't it be easier to slide a straw over the screwdriver? Plus, wouldn't there be spots where water could pool in the buckets and cause them to rust? I've never pulled the buckets so that's just a question.

10911 - 05729

From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of content22207
Sent: Wednesday, November 16, 2011 10:19 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Flipping Headlight Buckets Upside Down

Apparently some Boo Boo is pontificating on DMCTalk that the headlight buckets can't be flipped upside down. This is obviously incorrect:

My buckets have been upside down for almost two years now (not the bulbs themselves -- just the buckets). This allows me to change my bulbs and adjust their beams without digging into the fascia. You can't do anything about the side screws (they are still going to be on the side even when the buckets are upside down), but at least I don't have to tear my paint job up reaching into the top with a screwdriver. It's also a lot easier to get the screws started on the bottom.

Bill Robertson

[Non-text portions of this message have been removed]


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive