[DML] Re: Upgraded Front Suspension
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Upgraded Front Suspension



Split towards the back *IS* factory (Illustration on Page J:09:01 of the workshop manual is from the front).

This is backwards (intentionally) -- split towards the front: http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/375011_267060150005909_100001057778755_815811_2047237322_n.jpg

Bill Robertson
#5939

--- In dmcnews@xxxxxxxxxxxxxxx, S C <dmamessages@...> wrote:
>
> Rob,
> 
> I just wanted to correct myself from the statement that I mentioned on the
> Fall Tour which was posted on the DML.  I was wrong in saying that the way
> the bushings are installed at your shop split towards the back (front sway
> bar bushings).  I took a look at my suspension and it is indeed installed
> the same way as the factory pictures show.  This is how I have always
> installed them after you (Grady) showed me how to install it at your shop.
>  My memory was just reversed in thought that night.  I just wanted to clear
> that up.
> 
> -Steve Cosgrove
> 
> On Thu, Oct 27, 2011 at 10:22 AM, Rob Grady <rob@...> wrote:
> 
> > **
> >
> >
> > Bill,
> >
> > I don't know who said that but they were mistaken as I normally leave the
> > bushings in the original factory position.
> >
> >
> > Rob Grady
> >
> > P.J. Grady Inc.
> >
> > From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf
> > Of
> > content22207
> > Sent: Thursday, October 27, 2011 9:15 AM
> > To: dmcnews@xxxxxxxxxxxxxxx
> >
> > Subject: [DML] Re: Upgraded Front Suspension
> >
> > This is why I left rubber bushings in the crumple extension mounts (LCA end
> > is polyurethane). I also turned them around so the meaty side is towards
> > the
> > back (sway bar arc pushes forward into an empty space). Horizontally it
> > makes no difference which way the bushing is turned.
> >
> > Combined with the 45 degree shape of our sway bars (Lotus' sway bars have a
> > sharp 90 degree bend), I think arc of travel arguments are a Red Herring.
> >
> > An owner at FFT'11 told me Rob Grady turns his bushings around as normal
> > practice even on OEM suspensions, probably to try and minimize the LCA
> > pulling backwards during braking.
> >
> > Bill Robertson
> > #5939
> >
> > --- In dmcnews@xxxxxxxxxxxxxxx <mailto:dmcnews%40yahoogroups.com> , Marc
> >
> > Levy <malevy_nj@> wrote:
> > >
> > > Thanks Mike..
> > >
> > > So, in the Lotus application there was no obvious changes made to allow
> > for the arc travel of the ARB? The movement is absorbed by the ARB itself?
> > Or did they maybe use softer bushings?
> > >
> > >
> > > --- On Thu, 10/27/11, Michael Griese <mike.griese@> wrote:
> > >
> > > > From: Michael Griese <mike.griese@>
> > > > Subject: Re: [DML] Upgraded Front Suspension
> > > > To: dmcnews@xxxxxxxxxxxxxxx <mailto:dmcnews%40yahoogroups.com>
> > > > Date: Thursday, October 27, 2011, 1:22 AM
> > > > Basically Lotus modified the original
> > > > LCA to take on a lower A arm geometry.
> > > > They separated the fore/aft location of the LCA from the
> > > > ARB by adding the extra
> > > > piece. The washer you see is not a collar but a
> > > > washer used to compress the
> > > > bushing on the end of the ARB. The reasons Lotus did
> > > > this was the improvements
> > > > in tire technologies over the years, the increase in
> > > > horsepower available from
> > > > the drivetrain and the improvements in braking. The
> > > > improved grip of
> > > > performance tires was starting to overwhelm the suspension
> > > > design.
> > > >
> > > > --
> > > > Mike
> > > >
> > > >
> > >
> >
> > _____
> >
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 10.0.1411 / Virus Database: 2092/3975 - Release Date: 10/26/11
> >
> > [Non-text portions of this message have been removed]
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated