[DML] Re: Disabling Lambda
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Disabling Lambda

Yup, exactly, and that's my plan.

--- In dmcnews@xxxxxxxxxxxxxxx, "jtrealtywebspannet" <jtrealty@...> wrote:
> Get out your Workshop Manual and go to D:04:12. Ring out each wire and check every plug and connection for corrosion, a backed out or bent connector, etc. There are THREE grounds for the ECU. One goes back through the harness to the engine compartment. ALL must be connected with low resistance to a good ground. Even if the O2 sensor, WOT switch, and temp switch are malfunctioning the frequency valve should be operating with the motor running. 
> David Teitelbaum
> --- In dmcnews@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@> wrote:
> >
> > Good point.  I must have missed that the frequency valve was doing *nothing*.
> > 
> > Sorry!
> > 
> >


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive