RE: [DML] Headlight switch wanted

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

I do have a NOS head light switch which must be used with the fix or the
same problem will happen. But I can normally fix the old ones if all the
part are there.
John Hervey
www.deloreanautoparts.com



-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
PAUL LEGUTKI
Sent: Monday, April 19, 2010 9:42 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Headlight switch wanted

John hervey might have one.   Dave Swingle could possibly have one also.
give him a buzz at dmc midwest.



________________________________
From: Stephen Rice <stevedmc@xxxxxxxxx>
To: dmcnews@xxxxxxxxxxxxxxx
Sent: Mon, April 19, 2010 7:40:52 PM
Subject: [DML] Headlight switch wanted

  
Does anyone have an old headlight switch laying around that they want
to get rid of?

Amazingly, I managed to loose mine a few weeks ago when doing some
work on my car.  Corrently the DMCH ones are on backorder and I am
hoping to have a working headlight switch soon.

Right now I am using a piece of wire for my headlight switch and it
looks really tacky.

On 19/04/2010, John Hervey <john@specialtauto. com> wrote:
> Dave,
> I hate to dispute you but there are 100's of cars running Plat +4 plugs
with
> no problems. The problem is they might show a problem up and the plugs get
> blamed for or someone may not know how to fix the problem and blame the
> plug. HR6 is a cold running plug that will sludge up faster where as the
HR8
> to 9 are the medium range that will burn off slug / carbon faster for the
> trolling around most DeLoreans do. The Platinum + 4 is a medium heat range
> plug that is good for the car.
> John Hervey
> www.deloreanautopar ts.com
>
>
>
>
>
> -----Original Message-----
> From: dmcnews@yahoogroups .com [mailto:dmcnews@yahoogroups .com] On Behalf
Of
> daveswingle2
> Sent: Saturday, April 17, 2010 10:26 PM
> To: dmcnews@yahoogroups .com
> Subject: [DML] Re: Tune-up
>
> Get rid of the +4 plugs. They can cause this problem. Put in Bosch HR6DC
or
> HR6DS or HR6DP gapped at the correct spec, and you'll fix it.
>
> Running poor when wet is a sign of a problem with the wiring or a cracked
> cap. Make sure everything is installed tightly.
>
> --- In dmcnews@yahoogroups .com, "stainlessilusion" <5n-@...> wrote:
>>
>> Guys; I am working on my D a little since I have a rough running engine,
> and am curious what the original coil has for output voltage. I'm looking
at
> John's 25,000 volt Bosch coil [as an upgrade?] since I doubt the stock one
> has that much punch to it. I have +4 plugs that are a little old but few
> miles and are still in good shape; also Johns 8mm wires and upgraded
> resistor. I once used the blaster coil with my setup but I remember having
> problems with it - I believe it was melted distributor rotor but can't
> remember correctly. Nonetheless, with what I have as far as plugs, wires
and
> resister; which coil should I be going after? My engine runs like garbage
> when it rains, and when it is dry it sputters at stops from time to time
and
> just doesn't feel "right". Thanks guys -----Dani B. in FL!
>>
>


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links





------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/