[DML] Re: High idle (2600 rpm) until temp hits 180 degrees
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: High idle (2600 rpm) until temp hits 180 degrees

Rich, a faulty or unplugged idle speed thermistor will cause this exact symptom. If you have access to a volt/ohm meter, meter across pins 9 and
11 on the idle ECU (behind the driver's seat under the drivers side
parcel tray) if the circuit is open, you either have a loose connection or a failed thermistor. The thermistor and connector are under the intake manifold on the Y pipe.


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive