[DML] Installatinn for rear quarter glass?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Installatinn for rear quarter glass?

This is how I think things should go to reinstall glass into my rear quarter panel -  any corrections or tips?

The quarter panel is off the car already,  I'm going to install the glass before it goes back on the car as this seems easier.

I'll lay the panel flat .

Use black RTV to install the air  vent into the rear of the window frame.

Lay a thin bead of RTV around the window opening and install my new rubber trim strip.  Tape it or clamp it till it sets?

Then a slightly larger bead onto the rubber strup and position the glass.

Then rivet in the retaining tabs - but before the second bead of RTV sets, or after?

Advice and tips appreciated.



To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive