Re: [DML] Re: Angle Drive installation - tips?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Angle Drive installation - tips?



Ah, I see... that makes sense, thank you.  That's what I'll do.  I'll 
pick up a 1-1/4" wrench and hopefully, I'll get that puppy off this week 
and be back in business.

- ed
1982 DMC-12 [11594]


Dave Swingle wrote:
>
>
> If the outer nut is turned in too far before the inner one, the taper 
> won't seat all the way.
>
> You can often take the angle drive off and put it back on without 
> touching the outer one. It's just good practice to tighten the tapered 
> end first (i.e. the inside).
>


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive