Re: [DML] dying the dash
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] dying the dash

It is Plastikote that was recommended by this board.  It does not say anything about prepping, however, a friend said that plastic has a break out residue that will make it difficult to dye without priming...  I was looking for someone else who had done it to give advice....

--- On Thu, 12/4/08, mike.griese@xxxxxxxxxxxxxxxx <mike.griese@xxxxxxxxxxxxxxxx> wrote:

From: mike.griese@xxxxxxxxxxxxxxxx <mike.griese@xxxxxxxxxxxxxxxx>
Subject: Re: [DML] dying the dash
To: dmcnews@xxxxxxxxxxxxxxx
Date: Thursday, December 4, 2008, 3:08 PM

I would think it depends on the dye you are using. What does the 
dye mfr recommend?


------------ -- Original message from Jack Singer <jack4545@yahoo. com>: ------------ -- 

Does anyone know if it is necessary to prime the dash before dying it? I am going to dye a black dash and binnacle grey but wanted to make sure I didn't 
> need to do anything other than clean it good. 
> Thanks in advance. 
> Jack. 
> 10022 & 


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive