[DML] Buiding Injector Testor/Cleaner.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Buiding Injector Testor/Cleaner.

I need a little insight here. Aside from trying to budget the 6585's
restoration from a monetary standpoint, I'm also looking to recycle as
much of the pile of used parts that I have as possible. One of the
things that I'm trying to do is clean all 18 injectors I have to make
a good set. I've been looking on eBay for a gasoline/C.I.S.
tester/cleaner, but they don't seem to come around too often, and when
they do, they're not cheap.

Now I know that I could build one of these things. I'm not worried
about that. But what I'm trying to figure out is what kind of
hand-operated Hydraulic Pump these things use? Or at least something
equivalent that I could use. I only need 6 bar max, but don't quite
know where to look for something of this sort.

Any ideas?

vin 6585 "X"


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive