[DML] 245/60Tires and Valve covers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] 245/60Tires and Valve covers

I've been told by DMC CA that you can run the car with the valve covers
off, they are mostly there to contain the oil, more than vacuum.


From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf
Of mike
Sent: Tuesday, August 26, 2008 8:35 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Re: 245/60 R15 Tires?


Did you notice slower acceleration with the wider tires?  I haven't
pulled my headliner down to do any work on it.  I guess to check for the
writing, I would have to pull out the headliner and re-glue it, future

I have a potentially more serious problem, over the weekend, I adjusted
my right side valves and when reassembling the valve cover stripped the
threads on one of the long bolts with the spacer for the cable clip.  I
found a longer bolt that I was able to shim with two nuts and it took
hold and tightened down.  Haven't started up the car yet, but am hoping
it will hold and not leak.  I've never replaced threads before
especially in an area as sensitive as the engine block!


VIN #5781

[moderator snip]


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive