[DML] Air Mixture housing gasket
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Air Mixture housing gasket

I'm currently in the process of doing the Valley of Death repair/maintenance. I disassembled the upper and lower air mixture housings in order to clean both halves up good. Sandwiched in between them was a gasket that came off quite readily and there was no indication of any RTV silicon used during its initial assembly.

I have a new gasket, but my question is whether or not I should use RTV silicon when reassembling the upper and lower air mixture housings. Is the gasket alone enough to make a tight seal?





To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive