[DML] Dryer Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Dryer Removal



I have the early type of acculator/dryer.  I cannot get the top line
nut to come loose.  It is 28mm, which is large and I'm holding the
dryer still with a 1 1/4" wrench.  I have soaked the connection with
liquid wrench.  But still the nut will not come loose, and is being
damaged.  This is the short line from the dryer to the inside of the
car.  I have removed the plate under the spare tire to get to it. 
What should I try next.  Does it help to heat the nut and line with a
propane torch?


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive