[DML] New Flux Chasing Fix
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] New Flux Chasing Fix

For those of you who got the new Diamond Select Flux Capacitor and noticed
it fluxes backwards, I have a quick fix.  Remove the 4 screws holding down
the backer board.  It also helps to remove the 2 screws holding the rubber
feet.  Pull the board out and flip it over.  There is a roughly 2" x 3"
circuit board on back.  Remove the two screws and carefully pull it up from
the sticky white cushion.  Off to one side there is a group of 3 white
wires.  Those are the wires for the chasing LED's.  Take a soldering iron to
the first and last wires to pop them off.  Then switch them around and
re-solder.  Re-assemble and you're done!  The LED's will now chase to the
middle!  This whole process took me about 15-20 min.
VIN 3488

[Non-text portions of this message have been removed]


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive