[DML] Re: Speedo gear rpm.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Speedo gear rpm.

Thanks Welmoed, I knew that the warning light uses a different feed. 
That was the good news, I still (Sort of) know when I'm low on fuel.

I am certain I have to take the binnacle off again. I was missing a 
couple of the nuts/washers that fit to the back of the gauges, so I 
guessed as to where they should go, since they were not there when I 
removed it the first time, sadly when I put it together I put one or 
more of the nuts in the wrong place, killing the fuel gauge. All of the 
other gauges work fine.

SO you are absolutely correct, another trip under the steering wheel is 
in my future.


--- In dmcnews@xxxxxxxxxxxxxxx, "welmoedj" <joe.dalton@...> wrote:
> Actually you may have to get under and in again.
> The foil circuit may have loose copper traces that connect to the 
> edge connector, thus causing your fule meter not to work properly.
> The warning light uses a different trace that may still be in the 
> correct position to connect to the edge connector.
> Use of some superglue (cautiously) fixed my loose ends.
> Welmoed.


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive