[DML] Suspect DMC Engineering -- Repaired

["content22207" <brobertson@xxxxxxxxxxxx>]

Just finished running my second evaporator drain hose to the outside
world. Lubricated the lower blower motor bearings through the former
drain access hole. Can't believe how quiet the blower motor is now! It
only occasionally squealed, but it always was noisy. Is a quiet as a
Lincoln now.

I have not seen this issue addressed before. To me, filling the lower
blower motor bearings with condensed water is a ridiculous idea. No
wonder DeLoreans go through blower motors so much more rapidly than
normal cars. 

That condensed water also drips all over the passenger's feet.

I highly recommend adding this procedure to the traditional list of mods.

Bill Robertson
#5939



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/