[DML] Frame Rust - accessing areas from beneath.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Frame Rust - accessing areas from beneath.

I have the typical epoxy flaking on corners of frame and surface 
rust formed.  I also have a more serious situation on the front end, 
where epoxy softened and lifted in areas due to brake fluid leaking 
for the previous owner. I'd like to get to this, but not sure how to 
remove the loose epoxy in hidden areas.  If I do the best I can with 
scrapers and screwdrivers, apply POR 15 and then paint, will it be 
good enough that some deep areas will not get prepared properly? I 
don't plan to lift or remove the car from the frame and want to do 
what I can from underneath when on jack stands.  I live in MA, but 
never take the car out in the rain or snow.  How critical is it that 
I repair the rust immediately, since it's not exposed to rain or 
snow?  Will general moisture in the air attack the rust that quickly?

Also, if I ask Rob Grady to do this job, does he have better access 
to the hidden areas, and is it very expensive for him to fix?


Vin 10944

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive