[DML] Re: Warm Start Issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Warm Start Issue



If it starts great cold but not well after 3-4 hours then it could
still be the thermo-time switch. It may not be closing at the right
temperature so it isn't letting the cold start valve work when it
should. When it is completely cold then it does allow the cold start
valve to work. There are other systems to check. For instance the
bypass relay for the ballast resistor, the vacuum circuit for the
advance, etc.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "bitsyncmater" <david.mckeen@...> wrote:
>
> My car starts great cold.  Is the cold start valve needed to start it
> cold.  If it was just used to start a warm engine than you may have
> discovered where the problem lies.  Bit then why does a longer rest
> pressure time also fix the problem.


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive