[DML] Re: Robertsonian Headliners..
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Robertsonian Headliners..



Glued it up this morning -- I sure hope that was the right headliner I
just installed.

There is gobs of room to fit it into the vehicle as a single piece. I
used to think that the two pieces were necessary to fit the fabric
around the curved doorway, but that's obviously not the case because
the rear curve is identical to the front curve, and the front curve is
one piece. It takes several stabs to hit both roof retainers together,
but certainly no more than 4 or 5 times. 

To be honest I have no idea why Dunmurry installed the original
headliners as they did. A single piece installation is very easy and
it sure looks a lot better than that overlapping seam. Very finished.
I've always thought the factory installation looked rather amateurish.

Good thing I'm not competing concours -- wonder how many points I'd
lose for a proper headliner.

I did modify the windshield installation a bit. Rather than gluing the
fabric over that plastic piece, I folded and glued it to the back of
the backerboards (just like the rear). That plastic piece is now a
trim piece. When you look through my windshield you see black plastic,
not grey fabric.

With all these improvements (while the car is out of service I am
*FINALLY* installing a new driver's power window assembly), #5939 may
be the nicest car excluded from indoor display...

Bill Robertson
#5939


>--- In dmcnews@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@...> wrote:
>
> Are you sure it will fit back in to the car in one
> piece?!
> 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive