Re: [DML] Re: WANTED: Angle Drive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: WANTED: Angle Drive



Elvis,
 
I agree with you completely, but everyone should note that there is a difference between the originals and the DMCH remanufactured ones.  The two behave (and fail) quite differently.  My repaired original gears have proven to be very reliable, when lubed periodically with my blend of synthetic grease and 80-90w gear oil.
 
The only time my original gave me any trouble was on the sub-zero temperature drive home from the previous owners house.  However, at 2000 miles from home, I couldn't stop to lube it!  I sure wish he had....
 
Jake Kamphoefner
1063


 
----- Original Message ----
From: Elvis <elvisnocita@xxxxxx>
To: dmcnews@xxxxxxxxxxxxxxx
Sent: Wednesday, November 28, 2007 8:50:32 AM
Subject: [DML] Re: WANTED: Angle Drive

ROFL

wasn't it you who disconnected the idle speed motor 
connector instead of fixing the little problem ????

Are you guys all bored or why is my mailbox stuffed
with angle drive mails instead of somebody really 
working on it ? Little less conversation, a little 
more action...

And why does mine work even though I have an original 
one and the cable is wound like it always was ?
because I give it some drops of oil once or twice a year
and I check if everything runs smoothly without too much 
force needed ?

if one breaks - stuff happens.
if two break - well, still could be wrong.
if three break - one should start thinking...
if four break - it's not the angle drive's fault!


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive