[DML] Fuel Pump Not Getting Voltage After RPM Relay Replaced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Fuel Pump Not Getting Voltage After RPM Relay Replaced

My Delorean wasn't getting power to the fuel pump, and I replaced the 
RPM relay. Still didn't work, so I ran a new wire to the pump, and cut 
the blue/white wire at the relay and soldered the pump wire. I checked, 
and the pump ran. It started, I drove it out of the garage and was 
putting some things back into place -- and after 3 hours I tried to 
start it and it ran for a second, then quit. I checked the fuel pump 
for power, there was none. I checked the pump wire at the relay, no 
power. I tried to use a jumper on the relay to make it start  still 
wouldn't start, and I heard some clicking going on in the main & aux 
relay area. Finally gave up and pushed it back in the garage and have 
been searching the website for answers. Is it possible that I have a 
bad ignition coil or would it be something else?

If it's the coil, could someone give me a part number where I can get 
it quickly (locally)?



To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive