[DML] minor plastic Door base question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] minor plastic Door base question

Hello everyone,

The metallic DMC door base insert was bending up at
the ends and without much effort, I lifted it off of
it's plastic base.  After that, I noticed that the
plastic base was also loose, so I popped it off too.

There is a ton of dried glue on the plastic base where
the metallic insert was and on the car itself where
the plastic base was attached.

My questions:  What is the best method to clean off
all the drive glue and what is the best stuff to use
to re-apply both the metallic and the plastic piece
back to the car?

As a side note, the plastic piece has small plastic
inserts on it, most are bent, wonder if I can buy this
piece new somewhere?

Thanks, Royce H.


Royce Holden

Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive