Re: [DML] Broken Exhaust Manifold Stud
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Broken Exhaust Manifold Stud

You wouldn't think it works without destroying the surrounding
aluminum,but I've heated the stud remains with a torch, hit the air,
and blew out most of the stud without harming the head. 

However, my first choice would be to drill out the stud large enough to
use an " e-z out" then heat the area with a Mape gas torch (hotter than
propane), then install and try to remove with the e-z out.

____________________________________________________________________________________Sick sense of humor? Visit Yahoo! TV's 
Comedy with an Edge to see what's on, when.

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive