[DML] Idle speed motor rebuild
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Idle speed motor rebuild

I rebuilt my idle speed motor today.  This may have in
fact been the issue all along.  This motor was filled
with dirt and the grease was all dried up within the
dirt it looked like dried glue.  The inital turning
resistance was very high and not uniform. (seemed to
stick a bit at full open)

The entire motor was stripped down, and cleaned.  Both
support surfaces were polished to remove the grime and
rust.  Their fittings in the caseings were re-greased.

Contacts were polished and reterminated.  Nylon screw
threads were cleaned and refitted.

Tested in the car for buzz.  Sounds healthy.  Ill
install it properly tommorrow and take a test drive.




Jordan Rubin

Like Myspace for your Delorean, plus HOWTOS and a parts catalogue
Wie Myspace fur dein Delorean, plus HOWTOS und Ersatzteilcatalog 


Expecting? Get great news right away with email Auto-Check. 
Try the Yahoo! Mail Beta.

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive