Re: [DML] Oil pressure sender - always says 80 psi
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Oil pressure sender - always says 80 psi

It is a good sender, but it is not available from DeLorean Midwest 
Connection. It is available from the Midstate Delorean Club.

Joe Kuchan

--- In dmcnews@xxxxxxxxxxxxxxx, Soma576@... wrote:
> Marc and others,
> A few years ago I bought one of the 'new' senders from DMC Midwest 
Connection.  It has worked exactly as it should - around 30-40 when 
hot, and around 70 when stone-cold.  This is with a Purflux filter 
and Mobil Delvac 1300 Super 15W40 HDEO.  
> I don't know if they still sell them, but that one is the one to 
> Andy
> -----Original Message-----
> From: malevy_nj@...
> To: dmcnews@xxxxxxxxxxxxxxx
> Sent: Mon, 30 Apr 2007 9:24 AM
> Subject: Re: [DML] Oil pressure sender - always says 80 psi
> I have yet to find a reliable sender.  Some read very
> low, some read very high, and some pin the needle
> straight up (beyond 80 PSI).
> They will work fine for the first few drives after it
> has been replaced, but within a month (my experience
> has been that) they all fail.
> Granted, I have not gone through the list of DeLorean
> vendors to try the part from each of them because I
> assume they are all using the same GM cross-ref part.
> --- sweetp01569 <paul.sweet@...> wrote:
> > Question about oil pressure sender.  My oil pressure
> > gauge always 
> > reads just under 80 psi the instant I start the car.
> >  Is this correct? 
> > Just want to make sure, as I hear there are possible
> > issues with 
> > incorrect senders that display the wrong pressure.  
> > 
> > Thanks,
> > 
> > Paul
> > 
> >

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive