Re: [DML] Hot wire on top of Frame.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Hot wire on top of Frame.

I was removing the starter from my D -I think it is bad- and noticed 
the 2 gauge main +12 wire sits on top of the steel frame.  And barely 
squeezes through at hole into the engine bay.

Is this normal?  It would seem to me that as this wire wears against 
the frame it could short out and cause a fire.

I am seriously thinking of changing the routing of this wire.

However, I tried to loosen it and it will only come out in pieces.   i 
would probably have to leave the piece on top of the frame.

Anyone else dealt with the wire when removing/replacing the frame?

Is this an incorrect installation from the factory?


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive