[DML] Toby Tabs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Toby Tabs

    While attempting to install 2 Toby Tabs I have run into a problem.  The instructions say that the threaded end of the bolt must not be exposed, and they came with a self-locking nut that can tighten no further than the end of the bolt.

    The problem is even when fully tightened the bolts have approx 1 1/2"  of exposed threads, therefore the self-locking nut can't be used.

    The Toby Tabs themselves are actually almost 3/4" longer than the original bolts are, and the originals had leftover threads.  The kit came intact with all the applicable washers and nuts, and the instructions were followed to the letter. I haven't been able to get a hold of the vendor.  In a pinch! Any help would be appreciated, thanks!

We won't tell. Get more on shows you hate to love
(and love to hate): Yahoo! TV's Guilty Pleasures list.

[Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive