RE: [DML] Hard Start/ Bad Idle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Hard Start/ Bad Idle

Jason, If you took the fuel distributor apart, like separating the up and
lower half be sure to look for seepage. Normally they will leak because of
the 75lb's of pressure and you may catch the car on fire. Normally that is
left to the professionals.
John Hervey
The last of the independent DeLorean parts distributor.


-----Original Message-----
From:Jason Rowe
Subject: Re: [DML] Hard Start/ Bad Idle

  Well, I checked the fuel distributor plunger and that may have been a lot
my problem. After putting it back together it started right up. I waited
until the
next morning and tried it again and sure enough it started right up and
was staying running but only barely.

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive