[DML] Re:Auto trans stuck in 2nd
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re:Auto trans stuck in 2nd

Sounds to me like your shift computer is
malfunctioning. I had a similar problem where I'd
always start in second, but I could always get up to
third. Unfortunately, it sounds like you can't reach
third either.

If you're starting in second, I'd say one of two power
transistors on the shift computer circuit boards has
blown. (which also raises the question of what caused
it to blow) As for being unable to shift into third...
not sure. Could be a loose solder connection between
the shift computer board and the "mini-alternator
thingy" that rides alongside the tranny that measures
RPM.  (had that happen to me too) The signal is bad
and the computer thinks you're going slower than you

I'd definitely say change the tranny fluid and filter
first and see what happens. After that, let us know
how it goes, we're all here to help =)


Don't get soaked.  Take a quick peak at the forecast
with the Yahoo! Search weather shortcut.

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive