Re: [DML] Re: Sensors under manifold
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Sensors under manifold



The original speakers had already been rewired, so I did not have to go in to fix the floating ground issue on the other speaker. I guess there might be problem if these speakers are different wattage? I guessed, I worked quickly first time, because I razor cut , then went out looking out for charcoal Grey duct tape to seam back up, needless to say I did not want to cut or heat gun the other side, its too difiicult to get the original look when put  back together. 

David Teitelbaum <jtrealty@xxxxxxxxxxxxx> wrote:           In your case you really do have to go in and replace the other
speaker. They have to be done in pairs and the origional speakers are
junk. Heat up the vinyl with a hair dryer or a heat gun and work slowly.
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, Marv Williams <marv2020@...> wrote:
>
> I agree with Dave, its a tough decision to leave "well-enough"
alone. I bought two brand new speakers for the back of my Delorean, 
$100.00 a pair, and I only put in one speaker in, after tearing out
the quarter panel, pulling the headliner, cutting trim around the
door, and testing the other speaker I held out. It's hurts to see a
new speaker, sitting in my garage, but I could not (logically) justify
the risk. The old speaker has already been rewired and is working fi



         

 
---------------------------------
Sponsored Link

Mortgage rates near 39yr lows. $310,000 Mortgage for $999/mo -  Calculate new house payment

[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated