[DML] Re: Hot exhaust - continued
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Hot exhaust - continued

Have you converted to even-fire or have you continued to use the 
uneven firing pattern? Is the timing (spark) replicated accurately?

Harold McElraft - 3354

--- In dmcnews@xxxxxxxxxxxxxxx, "Nick" <nicholden@...> wrote:
> I will try answer all the questions below:
> I have had the intake off several times and replaced O rings etc. I 
> dont feel there is an air leak anywere and i have poured water 
> around the intake port area while the engine was runnig to see if 
> sucked in anywhere and ran rough. It didnt.
> I am aware that to much fuel would normally cause a cooler temp but 
> i now have to look at the impossible as i seem to have ruled out 
> the possibles....The occasional flame out of the exhaust is what 

> Cheers, Nick - Sydney

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive