[DML] Diagnostics socket?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Diagnostics socket?

Hi all 

I am currently cleaning the engine whilst the exhaust is off and 
this bracket and wires was loose (not bolted to anything) it was 
only attached with by the wire that has broken (i only gave it a 
gentle tug) all other wires were free! 


I now have some questions! 

1.Is it the diagnostics socket? 

2. Should the bracket screw on to the same place as the auto trans 
dip stick? 


3. where does the yellow wire attach? 

4. the second wire (in the photo) has broken/ the other half is deep 
down where the cat was....(Do you know the one i mean) - there are 
three tiny wires inside (Red, White and bare?) - Can i twist them 
all together and solder both halfs back together and tape up - or do 
they have to be connected separately - what does it do? 

worse case scenario i will buy a new one from DMCH - but can i fix 

5. where does the final wire(S) go - t has a strange black male 

6. Could i leave the unit off? 

7. what size nuts attach this to the engine block? 

many thanks 

Doc 20 
Vin 16723 AKA The Beast 
Exeter, Devon

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive