RE: [DML] Fuel Injection Hoses
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Fuel Injection Hoses

Thanks Joe,
  How do you get the inner hose over the barbs, it looks like I have to cut the old ones off., but it looks like some type of tool to get the inner part of the tube over the barbs. I saw the stainless steel hoses on John Hervy, but at $299.00,  hope your talking about something else.

Joseph Kuchan <josephkuchan@xxxxxxxxxxx> wrote:

Inside the rubber lines is a hard, tough teflon-like inner hose that is heat 
shrunk over the barbs of the hose ends. The outer rubber doesn't do much 
except provide protection for this inner line and make the top of the motor 
look ugly. A good auto parts store can sometimes fix the hoses you have 
very economically by replacing the inner hoses. The problem is that in the 
process they have to partially slit the outer rubber hoses and the finished 
product usually doesn't look very good.

SS braided lines are a very nice product and I recommend them. 

-Joe Kuchan

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive