[DML] Re: Ignition Resisitor Relay..
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Ignition Resisitor Relay..

I have never seen a wiring diagram with the relay in it. I think it 
was installed with the relay to keep power or feed back off the wire 
after start. A diode would probably have done the same thing. If the 
circuit gets weak it can cause starts to take longer - hot or cold.

Harold McElraft - 3354

--- In dmcnews@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@...> wrote:
> I think I may have read this before, but anyway..
> The relay next to the ignition resistor is designed to
> increase the voltage during starting.  However, I
> can't find it in any of the schematics I have. 
> Is it on there, and I am blind?  Or is is an error in
> the schematic?  On all of the versions I have, it
> shows a blue/yellow (UY) wire direct from the starter
> to the resistor pack.
> Anyone have a drawing of that circuit as it is on our
> car?  It does not look all that complex.  
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive