[DML] Cooling fan shroud does not fit...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Cooling fan shroud does not fit...



Hello everyone,

I was under the car today inspecting the font end and noticed that the 
shroud that covers the radiator does not line up with the bolt holes 
in the underbody. It appears that the mounting holes in the underbody 
were all drilled too far out from the shroud. My car is a fairly early 
vin 2277, perhaps a construction flaw? Has anyone else noticed this? 
Does the shroud shrink over time?

On another note, I applied a hose clamp over where a bolt had broken 
on my cross over pipe heat shield and now my car is rattle free. 
Hooray!!

Nathan









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive