[DML] Thermostat Replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Thermostat Replacement



I've been told by many that I don't need to remove the W intake pipe 
to replace the thermostat.  I was able to get the front bolt off of 
the housing, but how does one go about removing the other one under 
the W pipe?

I have the throttle partly removed to get to the back bolt, but my 
little 7/8 wrench just doesn't have the length to reach in there to 
have any torque.

Not enough room in the compartment for a breaker bar either.  The 
water bottle is in the way.

Thanx in advance.

Johnny
5518
AZ-D








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive